Full control, ultimate compatibility
The FX-3000-C is a building automation controller with BACnet B-BC profile. Unique in its kind, it is 100% freely configurable. It communicates using Modbus, M-Bus or BACnet, serial, UDP or TCP and has an on-board NAT router. Fully equipped with web server, history recording, user management, energy reporting capabilities and many more features, the FX-3000-C is an all-you-need solution for all your building management needs.
Parametrising the FX-3000-C is done with our software suite FX-Editor, offering a clear and efficient project overview. It makes programming the controller not only an easy, but also a speedy task.
When connecting field devices to the FX, multiple FX-controllers to each other, and all controllers to a SCADA server, running a building really becomes a piece of cake.
Central control unit with 40 integrated I/O’s and a 10.1” touch screen View More
FX-Spider
Central control unit with 40 integrated I/O’s and a 10.1” touch screen
Fast, intelligent, clear and easy-to-use local control
The FX-SPIDER-40/10 central controlling unit for building automation and security applications is a special version of it’s brother, the FX-3000-C. Dedicated for small processes, narrow spaces and all-in-one solutions, it features a 10.1” touch screen showing HTML-graphics, a powerful processor to run your programs, and 40 built-in I/O-points, thus being everything you need to get your project up and running.
The FX-SPIDER-40/10 uses the IEC-61131-3 standard for PLC programming. Connect the standard European plug to a wall socket and get going in no time to discover the true meaning of plug and play!
I/O MODULES
Connect, measure and control – reliable I/O modules for digital and analogue signals.
Connect and measure
The 8 channel analogue input module is used to read input signals from active and passive sensors. Its 8 individually configurable channels can read data from resistive sensors, current loops, voltage messages, and digital indications. Poll the module from a serial Modbus master FX-controller to get reliable, accurate, precise and fast readings from your field equipment.
Connect and control
The 8 channel analogue output module is used to generate voltage control signals. Its 8 individually configurable channels are short-circuit protected, can send out precise voltages from 0 to 10 V, and have parametrisable safeguard values in case of a rupture in communication from a serial Modbus master FX-controller.
Digital open collector output module, 16 inputs, max 100mA/channel View More
DI-16-C
Digital open collector output module, 16 inputs, max 100mA/channel
Connect and detect
The 16 channel digital input module is used to read and detect digital signals for indication, alarm, or impulse measurement purposes. Each channel can be individually configured, and has a green and red LED to show its current status. Connect the module to a serial Modbus master FX-controller to get reliable and fast indications from your field equipment.
Connect and detect
Connect and control
The 8 channel digital output module has 8 changeover relays, capable of taking on a maximum load of 2A at 24 VAC, or 6A at 12 VDC. Each channel has a LED indicating its current status. Control loops with a load up to 1 A at 30 volts from each channel and swiftly command any device from a serial Modbus master FX-controller.
Digital open collector output module, 16 inputs, max 100mA/channel View More
DOOC-16-C
Digital open collector output module, 16 inputs, max 100mA/channel
Connect and detect
Connect and control
The 8 channel digital output module has 8 changeover relays, capable of taking on a maximum load of 2A at 24 VAC, or 6A at 12 VDC. Each channel has a LED indicating its current status. Control loops with a load up to 1 A at 30 volts from each channel and swiftly command any device from a serial Modbus master FX-controller.
Connect and control
The 8 channel Triac module is used to send control signals to Triac field equipment. Its 8 individually configurable channels can send out control signals between 0 and 100%, and each have parametrisable safeguard values in case of a rupture in communication from a serial Modbus master FX-controller.
Connect and measure
The 8 channel input module is used to read input signals from active and passive sensors. Its 8 individually configurable channels can read data from resistive sensors, current loops or voltage messages, and digital indications. Selection is done using the physical jumpers on the module. Connect the module to one of our outstations to get reliable, accurate, precise and fast readings from your field equipment.
Connect and control
The 8 channel output module is used to generate voltage controlling signals. Its 8 individually configurable channels are all short circuit protected, have customisable minimum and maximum voltage outputs, and have configurable safeguard values in case of a break in communication. Connect the module to one of our outstations to control your field equipment fast and accurately.
Connect and know
The 16 channel digital input module is used to read and detect digital signals for indication, alarm, or impulse measurement purposes, or to detect whether or not a cable is still intact (security loops). Each channel can be individually set, and has a green and red LED to show the current status of each point as soon as you see the module. Connect the module to one of our outstations to get fast, accurate and precise readings.
Connect and control
Each of the 8 channels of the digital output module with 8 changeover type relays, can be set to send programmed values, or manually switched, overwriting this programmed value. Should there be an unforseen interruption in the communication towards the module, each relay can preserve its current state or switch to a pre-programmed status. Each relay has an LED, indicating its current status. Use the DO-8 module to control devices up to 250 Volts.
Combined I/O module, 20 inputs, 16 outputs View More
COMBI-36
Combined I/O module, 20 inputs, 16 outputs
Connect, measure and control
The 36 channel combination module is our most used module for multiple automation purposes. Combining the speed and precision of our four dedicated modules, the COMBI-36 offers enough connectors to be used for instance as the sole I/O-interface in a junction box to connect machines in a different room, or the ideal quantity distribution of I/O-points to use in any substation cabinet.Connect the module to one of our outstations to get reliable and fast readings, and assure a precise control of your field equipment.
ROOM CONTROLLERS
Freely programmable field controllers for hotel rooms, district heating or small ventilation systems etc.
Process controller with 24 I/O-connection points; Modbus slave and master simultaneously
Program, connect, measure and control
The multi24 is a controller that can be used for numerous applications, such as hotel rooms, district heating or small ventilation systems. The module’s CPU runs its code independently, enabling swift and accurate reactions to changing measurements. Programmed using the international standard IEC 61131-3, the multi24 can be used as a stand-alone controller, or the module can be connected via Modbus RTU to a building management system to receive settings and commands, or send out alarms or other data. The internal Flash memory of the module makes sure all data is saved even during power or communication interruptions. The controller can also simultaneously act as Modbus master for intelligent local sensors or terminals, like the Fidelix Modbus multiDisplay. Additionally, the multi24 can be equipped with an enocean transceiver to connect wireless sensors and actuators.
Choose your program, connect, measure and control
The Multi-16 is a versatile controller that can be used for numerous applications, such as hotel rooms, district heating, small ventilation systems, or as room controller. The modules CPU runs its code independently, enabling swift and accurate reactions to changing measurements. Choose the Multi-16 program that best fits your needs from our extensive library, or ask for your personal, dedicated program. All modules will be pre-loaded with the requested program, tested and 100% guaranteed to work. The module can be connected via Modbus RTU to a Fidelix building management system to send out alarms, measurements or other data. The internal Flash memory of the module makes sure all data is saved even during power or communication interruptions.
TOUCH SCREENS
Powerful and intuitive touch screen user interfaces for complete control of BMS.
Powerful user interface for controlling building automation.
The 15.6” touch screen
Human Machine Interface display is the easiest way to consult your BMS. Installed onto the door of an electrical cabinet anywhere in the building, the Visio-15-C can be used to access any FX-controller or other TCP/IP connected device in the building. Providing easy access and a fast and secure connection to the controllers, the display is the perfect way to facilitate maintenance or support personnel in their handling with the building’s systems. Sporting a familiar Android environment, all will naturally feel the display with ease and comfort.
Room terminal with a 3.5″ touch screen. Can be installed in a box or on a surface. Straight model. View More
multiDISPLAY (A)
Room terminal with a 3.5″ touch screen. Can be installed in a box or on a surface. Straight model.
Local control and consulting
The primary usage of the multiDISPLAY is as room panel in hotels, apartments and private homes. However, the embedded modbus capabilities and processor enable the multiDISPLAY to also be used as an operating terminal for other applications. Connect the multiDISPLAY to one of our multi-24 modules, straight to our substations or any other modbus communicating system. Mount the multiDISPLAY into a standard pattress box, and instantly make your project look trendy thanks to the 100% customisable user interface you can create for the multiDISPLAY. Create your own graphics with our graphics editor to measure, control or simply consult virtually any application or system you connect the display to. You can add your companies or the building owner’s logo to the freely editable graphics you make for the display to give it a unique look and feel. The Modbus RTU master or slave mode enables the display to be used with literally any Modbus device.
Room terminal with a 3.5″ touch screen. Can be installed in a box or on a surface. Tilted model. View More
multiDISPLAY (B)
Room terminal with a 3.5″ touch screen. Can be installed in a box or on a surface. Tilted model.
Local control and consulting
The primary usage of the multiDISPLAY is as room panel in hotels, apartments and private homes. However, the embedded modbus capabilities and processor enable the multiDISPLAY to also be used as an operating terminal for other applications. Connect the multiDISPLAY to one of our multi-24 modules, straight to our substations or any other modbus communicating system. Mount the multiDISPLAY into a standard pattress box, and instantly make your project look trendy thanks to the 100% customisable user interface you can create for the multiDISPLAY. Create your own graphics with our graphics editor to measure, control or simply consult virtually any application or system you connect the display to. You can add your companies or the building owner’s logo to the freely editable graphics you make for the display to give it a unique look and feel. The Modbus RTU master or slave mode enables the display to be used with literally any Modbus device.
Room terminal with a 3.5″ touch screen. Without enclosure. View More
multiDISPLAY (C)
Room terminal with a 3.5″ touch screen. Without enclosure.
Local control and consulting
The primary usage of the multiDISPLAY is as room panel in hotels, apartments and private homes. However, the embedded modbus capabilities and processor enable the multiDISPLAY to also be used as an operating terminal for other applications. That is where the C model comes in handy; you can mount the multiDISPLAY into any device, box or machine to immediately add a 100% customisable HMI to your device. Create your own graphics with our graphics editor to measure, control or simply consult virtually any application or system you connect the display to. You can add your companies or the building owner’s logo to the freely editable graphics you make for the display to give it a unique look and feel. The Modbus RTU master or slave mode enables the display to be used with literally any Modbus device.
10.1” touchscreen interface for FX-controller View More
FDX Compact Visio-10-C
10.1” touchscreen interface for FX-controller
This 10.1” touch screen display is the easiest way to consult your BMS.
Installed onto the door of the FX-SPIDER-40/10 or onto a wall, the VISIO-10-C is used to visualize and control the FX-SPIDER-40/10 controller. VISIO-10-C can also be installed onto the door of an automation cabinet and used to access FX- controller or any other TCP/IP connected device on the same network.
Providing easy access and a fast and secure connection to the controllers, the display is the perfect way to facilitate maintenance or support personnel in their handling with the building’s systems.
Running on a familiar Android environment, all will naturally feel the display with ease and comfort.
PROTOCOL CONVERTERS
Seamless connection of versatile equipment and service interfaces.
The multiLINK protocol converter can be equipped with several different options. These include the additional M-bus and Modbus connections and the PoE and web server features.
The multiLINK protocol converter can be equipped with several different options. These include the additional M-bus and Modbus connections and the PoE and web server features.
Connect, convert and communicate
The multiLINK is a versatile communication module, interconnecting Ethernet, M-Bus, Modbus and RS-232 interfaces, both equipment and services, seamlessly. It can be used to convert fieldbus over UDP or TCP to RS485 or RS232, as a serial repeater, or as serial master. One multiLINK communication module can be connected to multiple serial devices, using different bus types. With the optionally embedded webserver with customisable HTML pages, you can consult and control the connected serial devices, or serve the information through XML to a SCADA system.
PROCESS CONTROLLERS
User-friendly process control – both on and off site.
District heating controller
You can order the Genius district heating controller with several different additional features, such as a room display with a touch screen, SMS alarms and remote control access via internet.
Control without worrying
The Fidelix Genius is the latest new technology in district heating controlling. Using a 3.5” graphical touch screen with clear, powerful and easy to understand graphics, it brings the pleasure back to installing and commissioning a district heating package. Connect your Genius to a GSM modem to forward SMS-alarms to the maintenance company, or allow remote browser-access through our multiLINK media converter with web server.
SECURITY MODULES
Reliable security modules with focus on connectivity.
Security from front to back door
The DU-10 door unit can be connected to actuator / solenoid controls (open or close locks, day/night mode) and alarms related to the entrance area (push-to-open buttons, movement detection, magnetic contacts, ...) totalling 8 inputs. In addition, the door unit can be connected to two different RFID readers, and to the Fidelix Building Automation system through a Modbus loop (RS-485). The points connected to the door unit are then displayed in the control room, just like any other point connected to the system. The unit is, within some limits, freely programmable and adjustable to meet every individual customer’s needs.
Wireless M-BUS indoor temperature & humidity sensor
The Fidelix FX-WMBUS-C-TH room temperature and humidity sensor is a plug-and-play room temperature and humidity transmitter. Much care have been taken to design a sleek, good looking device with high security and performance. The design allows for discrete integration when mounted in home environment.
Wireless M-BUS temperature & humidity sensor with external probe option View More
FX-WMBUS-G2-TH
Wireless M-BUS temperature & humidity sensor with external probe option
Measure to manage
The Fidelix FX-WMBUS-G2-TH room temperature and humidity sensor is a plug-and-play room temperature and humidity transmitter. Great care has been used to design a sleek, good looking device with high security and performance. The design allows for discrete integration when mounted in a residential or professional environment.
Measure to manage
The Fidelix FX-WMBUS-E-CO2 room CO2, temperature, and humidity sensor is a plug- and-play room CO2, temperature, and humidity transmitter. Great care has been given to design a sleek, good looking device with high security and performance. The device has 2 antennas for maximum range in both vertical and horizontal directions.
Measure to manage
The Fidelix FX-WMBUS-E2-VOC room VOC, temperature, and humidity sensor is a plug-and-play room VOC, temperature, and humidity transmitter. Great care has been given to design a sleek, good looking device with high security and performance. The device has 2 antennas for maximum range in both vertical and horizontal directions.
Measure to manage
The mains powered FX-WMBUS-R4-M-LR is a wireless MBUS repeater mounted with AC/DC adapter in combined enclosure. The device is a plug-and-play and highly configurable repeater for extending the range between meters and a collector/gateway. The enclosure is chosen to make the repeater as discrete as possible.
Once a minute a packet is sent from the repeater and contains information about the repeater, such as number of routed packets, software version, and current battery level. The packet is also used for time synchronizing between repeaters in a multihop system. Furthermore, this packet can be used as an indication that the device is up and running and the load of the repeater.
The repeater makes use of two high performance internal antennas. The internal antennas are mounted at 90 degrees from each other, thus taking advantage of both horizontal and vertical polarizations for maximum range. This diversity is important, especially for indoor operation since meters and gateway can be mounted either to the sides or above/below the repeater. If meters have different polarization (antenna alignment) a loss of up to 30 dBm can be observed. Having two antennas at an angle also minimizes multipath problems.
Wireless M-Bus Repeater (230 VAC, 2SMA, IP67) View More
FX-WMBUS-RX4-M-LR-X
Wireless M-Bus Repeater (230 VAC, 2SMA, IP67)
Measure to manage
The mains powered FX-WMBUS-RX4-M-LR-X is a wireless MBUS repeater mounted with AC/DC adapter in combined enclosure. The device is a plug-and-play and highly configurable repeater for extending the range between meters and a collector/gateway. The enclosure is chosen to make the repeater as discrete as possible.
Once a minute a packet is sent from the repeater and contains information about the repeater, such as number of routed packets, software version, and current battery level. The packet is also used for time synchronizing between repeaters in a multihop system. Furthermore, this packet can be used as an indication that the device is up and running and the load of the repeater.
The FX-WMBUS-R4-M-LR-X repeater needs to be equipped with two external antennas (Rx & Tx). Several types of antennas and optional extension cables are available.
Measure to manage
The Fidelix FX-AirRECEIVER is a housing unit for the collection of data from wireless M-Bus devices to convert it to the MODBUS TCP- server. The unit contains dual internal antennae for improved range indoors and transmitting information received via Ethernet to the Fidelix or others vendors supervisory system. The product is authorised for assembly indoors in residential and commercial properties and is powered by the 230V network
Wireless M-Bus Repeater (230 VAC, 1SMA, IP67) View More
FX-WMBUS-R4-M-LR-X
Wireless M-Bus Repeater (230 VAC, 1SMA, IP67)
Measure to manage
The mains powered FX-WMBUS-R4-M-LR-X is a wireless MBUS repeater mounted with AC/DC adapter in combined enclosure. The device is a plug-and-play and highly configurable repeater for extending the range between meters and a collector/gateway. The enclosure is chosen to make the repeater as discrete as possible.
Once a minute a packet is sent from the repeater and contains information about the repeater, such as number of routed packets, software version, and current battery level. The packet is also used for time synchronizing between repeaters in a multihop system. Furthermore, this packet can be used as an indication that the device is up and running and the load of the repeater.